|PON Interface:||1G EPON Port(EPON Class PX20+/PX20++/PX20+++)||Receiving Sensitivity:||≤-28dBm|
|Transmitting Optical Power:||0~+4dBm||Wavelength:||TX: 1310nm, RX: 1490nm|
|Optical Interface:||SC/APC Connector||VoIP:||G.711/G.723/G.726/G.729 Codec|
|POTS Interface:||T.30/T.38/G.711 Fax Mode, DTMF Relay||Name:||Fiber Optic ONU|
fiber onu device
EPON ONU QF-E101U-WR 1GE WIFI Support Frame Filtering and Suppression 2T2R MIMO
QF-E101U-WR type ONU products fully comply with EPON CTC3.0 EPON standards. It is operative, manageable and maintainable at telecommunication level, and can provide high speed data service for customers. It has a PON uplink port that connects to office end apparatus through optical fiber.
> Conform to EPON CTC3.0 EPON standards.
> Support Ethernet service layer 2 switching and wire-speed forwarding of uplink and downlink services
> Support frame filtering and suppression
> Support standard 802.1Q VLAN function, support VLAN conversion
> Support 4094 VLANs (802.1Q)
> Support Dynamic Bandwidth Allocation (DBA) function
> Support QoS, including traffic flow classification, priority marking, queue and dispatch, traffic shaping and traffic control, etc.
> Single ONU supports up to 1 LLID.
> Support IGMP Snooping
> Support Ethernet port rate limit loop detection
> Support power failure alarm
> Support lightning protection for power supply and lightning protection for service port
> Complies with 1.25GHz IEEE802.11n v2.0 and backward compatible with IEEE 802.11b/g standards
> Supports NAT/NAPT IP sharing
> WAN Protocols: PPPoE/Static IP/PPTP/DHCP
> Supports advanced 2T2R MIMO technology to enhance the throughput and coverage range significantly
> High speed data rate - up to 300Mbps
> 1 PON ports (1.25G)
> 1 10/100/1000M port
> 1 WLAN Port
> Power supply: 12VDC
> Power consumption: 4W
> Working temperature:0～55℃
> Storage temperature: -30～60℃
> Relative humidity: 10～90% (non-condensing)